7075合金,7075 alloy
1)7075 alloy7075合金
1.The effect of a little rare-earth on structure and properties of7075 alloy;微量稀土对7075合金组织和性能的影响
2.275%) content in commercial pure aluminium on the structure and characteristics of7075 alloy are investigated in this paper.275％)时对7075合金组织和性能的影响。
3.7075 alloy are related.介绍了国产仿美7075合金薄板,厚板,棒、管、型材,线材,锻件,模锻件样品的初步分析结果。
英文短句/例句
1.Effects of Double-Peak Aging on Microstructure and Properties of 7075 Alloy双峰时效对7075合金组织与性能的影响
2.Effect of Over-Length Aging on Properties of 7075 Alloy超长时效对7075合金性能的影响
3.Research of Refining Process of 7075Al Alloys by Spinning Rotor Degassing;7075铝合金旋转喷吹精炼工艺的研究
4.Analysis about defect in 7075 aluminium alloy cover of engine发动机7075铝合金主减上盖缺陷的分析
5.Finite Element Simulation of Die Forging Process for 7075 Al-alloy7075铝合金模锻成形过程有限元模拟
6.The Metal Flow Behavior of 7075/7050 Aluminium Alloys during Hydrostatic Compression;7075/7050铝合金充液压缩金属流动行为研究
7.Evolution of the Semi-Solid Microstructures of 7075 Aluminum Alloy Cast by LSC液相线半连续铸造7075铝合金半固态组织演变
8.CO_2 Laser Welding of 7075 High Strength Aluminum Alloy with Filler Wire;7075高强铝合金CO_2激光填充焊丝焊接的研究
9.Influence of pre-stretching on residual stress distribution in 7075 aluminum alloy thick-plate预拉伸对7075铝合金厚板残余应力分布的影响
10.Manufacturing of 7075 Aluminum Alloy Axle Body of Hollow Transmission Shaft by Squeezing Casting7075铝合金传动轴空心轴身的挤压铸造工艺研究
11.Effect of Processing Parameters on the Thickness of Outside Layer of 7075/6009 Aluminum Alloy Ingots铸造参数对7075/6009铝合金铸锭外层厚度的影响
12.DETERMINATION OF MULTIELEMENT IN ALUMINIUM-ALLOY OF 7075 BY PHOTOELECTRIC DIRECT-READING SPECTROMETRY光电直读光谱法测定7075铝合金中多元素
13.Relationship Between Hot Activation Forming Behavior and Phenomenological Constitutive of 7075 Aluminum Alloy7075铝合金的热激活变形行为与唯象本构关系
14.Surface Modification of 7075 Al Alloy Using Plasma Implantation and Deposition;塑料模具用7075铝合金等离子体复合注入沉积表面改性
parison of Mechanical Properties and Corrosion Behaviors of 7075 Aluminum Alloy at Various Aging Systems不同时效制度7075铝合金力学性能及腐蚀性能综合比较研究
16.Isothermal forming process of 7075 alloy anti torque arm lower joint7075铝合金防扭臂下接头等温体积成形工艺的研究
17.Investigation of Fatigue Properties of Friction Stir Welded Aluminum Alloys Lc4-T4 and 7075-T6;航空铝合金Lc4-T4和7075-T6搅拌摩擦焊接头疲劳性能研究
18.Study on the Fatigue Performance Assessment and Defect Analysis of Friction Stir Welded Joints of 7075 Al Alloy;7075铝合金搅拌摩擦焊接头疲劳性能评定和缺陷分析的研究
相关短句/例句
7075 Aluminum Alloy7075铝合金
1.7075 Aluminum Alloy in Stirring Frictional Welding;7075铝合金搅拌摩擦焊研究
2.Effects of Stationary Magnetic Field on Microstructure of7075 Aluminum Alloy;直流磁场对7075铝合金组织结构的影响
3.Effect of strain rates on flow stress feature of 7075 aluminum alloy;变形速率对7075铝合金流变应力的影响
3)7075 Al alloy7075铝合金
1.Refinement mechanism of in-situ TiC particles on the microstructure of spray formed7075 Al alloys;原位TiC颗粒细化喷射沉积7075铝合金组织的机理
2.The effect of AC magnetic field on the solute content inside grain and macro-segregation of7075 Al alloy was studied.在7075铝合金凝固过程中施加磁场强度为0。
3.The technological parameters of tube extrusion of7075 Al alloy,such as slug temperature,tools temperature,choice of lubricant,ratio of extrusion,and extrusion speed,have been determined by experiment in this paper.分析了高强度铝合金(7075铝合金)管材热挤压成形变形特点,对高强度铝合金(7075铝合金)管材热挤压成形进行了工艺实验研究。
4)7075 aluminium alloy7075铝合金
1.Analysis about defect in7075 aluminium alloy cover of engine发动机7075铝合金主减上盖缺陷的分析
2.Aim at7075 aluminium alloy vacuum electronic beam welding, using nonlinear finite element, the numerical simulation of the residual stresses distribution in welding joint was made.针对7075铝合金中厚板真空电子束焊接过程,采用非线性有限元法,对焊接接头的残余应力分布进行了数值模拟。
5)aluminum alloy7075铝合金
1.Numerical analysis of temperature and thermal stresses fields in quenching 7075aluminum alloy thick plates;7075铝合金厚板淬火温度场及热应力场的数值模拟
bination deformation mode for manufacturing ultra-thick plates of 7075aluminum alloy;制备7075铝合金厚板的复合变形模式
3.Flow stress of 7075aluminum alloy during hot compression deformation;7075铝合金热压缩变形流变应力
6)7075-Li alloy7075-Li合金
延伸阅读
东北轻合金加工厂生产的铝合金挤压管材和空心材东北轻合金加工厂生产的铝合金挤压管材和空心材睽铝合;;:;;;、:;产的
