安装,配置rp-pppoe拨号软件,使adsl成功上网(转)[@more@]----------------------------------------------------------本文出处http://linux- ,如需转载请注明!点击http://linux-免费下载大量的linux学习资料,软件!----------------------------------------------------------1.下载rp-pppoe-3.52。解压和安装:#tar zxvf rp-pppoe-3.5.tar.gz进入解压目录执行#sh ./go3。配置然后再来设置ADSL。这一处,我们要用命令。#adsl-setupWelcome to the Roaring Penguin ADSL client setup. First, I will runsome checks on your system to make sure the PPPoE client is installedproperly...Looks good! Now, please enter some information:USER NAME>>> Enter your PPPoE user name (default XXX): 在这里输入ADSL的用户名INTERFACE>>> Enter the Ethernet interface connected to the ADSL modemFor Solaris, this is likely to be something like /dev/hme0.For Linux, it will be ethn, where 'n' is a number.(default eth0):如果一张网卡就设置写上eth0Do you want the link to come up on demand, or stay up continuously?If you want it to come up on demand, enter the idle time in secondsafter which the link should be dropped. If you want the link tostay up permanently, enter 'no' (two letters, lower-case.)NOTE: Demand-activated links do not interact well with dynamic IPaddresses. You may have some problems with demand-activated links.>>> Enter the demand value (default no):不用写什么DNSPlease enter the IP address of your ISP's primary DNS server.If your ISP claims that 'the server will provide DNS addresses',enter 'server' (all lower-case) here.If you just press enter, I will assume you know what you aredoing and not modify your DNS setup.>>> Enter the DNS information here:在这里写上202.96.134.133下一个DNS是202.96.168.68 //这里根据个人不同可以修改----------------------------------------------------------本文出处http://linux- ,如需转载请注明!点击http://linux-免费下载大量的linux学习资料,软件!----------------------------------------------------------PASSWORD>>> Please enter your PPPoE password:输入密码>>> Please re-enter your PPPoE password:再输入一次FIREWALLINGPlease choose the firewall rules to use. Note that these rules arevery basic. You are strongly encouraged to use a more sophisticatedfirewall setup; however, these will provide basic security. If youare running any servers on your machine, you must choose 'NONE' andset up firewalling yourself. Otherwise, the firewall rules will denyaccess to all standard servers like Web, e-mail, ftp, etc. If youare using SSH, the rules will block outgoing SSH connections whichallocate a privileged source port.The firewall choices are:0 - NONE: This script will not set any firewall rules. You are responsiblefor ensuring the security of your machine. You are STRONGLYrecommended to use some kind of firewall rules.1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation2 - MASQUERADE: Appropriate for a machine acting as an Internet gatewayfor a LAN>>> Choose a type of firewall (0-2):这里添写为2** Summary of what you entered **Ethernet Interface: eth0User name: XXXActivate-on-demand: NoDNS: Do not adjustFirewalling: MASQUERADE>>> Accept these settings and adjust configuration files (y/n)?弄完后,就按一个y键。不要急于连接,REBOOT -N然后进入网络设置,设置ETH1固定IP,停止ETH1(我的是用他)然后ADSL-STARTPING 你的DNS,如果可以,那么,恭喜你!如果不行,REBOOT -NADSL-START,这下没问题啦,尽情享受吧!----------------------------------------------------------本文出处http://linux- ,如需转载请注明
来自 “ ITPUB博客 ” ,链接:/8225414/viewspace-940399/,如需转载,请注明出处,否则将追究法律责任。