搅拌摩擦焊,friction stir welding
1)friction stir welding搅拌摩擦焊
1.Influences offriction stir welding parameters on microstructure and mechanical properties of dissimilar magnesium alloys joint;搅拌摩擦焊工艺参数对异种镁合金接头组织和性能的影响
2.Development and application offriction stir welding;搅拌摩擦焊接技术的研究进展和应用
3.Analysis of Defects in Friction Stir Welding of Aluminum Alloy;铝合金搅拌摩擦焊焊接过程缺陷分析
英文短句/例句
1.The Research on Friction Stir Welding Process of Stainless Steel and Tools;不锈钢搅拌摩擦焊工艺与搅拌头研究
2.Process model of arc corrugation on friction-stir weld搅拌摩擦焊焊缝表面弧形纹形成模型
3.Research on the Welding Process of Friction Stir Welding for AZ31B Magnesium Alloy PlatesAZ31B镁合金搅拌摩擦焊焊接工艺研究
4.Superplastic Behavior of Weld Metal by Friction Stir Welding搅拌摩擦焊接焊缝金属的超塑性行为
5.The Optimized Disign and Failure Study on Pin Tool of Friction Stir Welding of Copper Alloy铜合金搅拌摩擦焊搅拌头优化及失效研究
6.Numerical Simulation of Microstructure of Stir Zone in Friction Stir Welding搅拌摩擦焊搅拌区动态再结晶的数值模拟
7.New Technology of Solidoid Jointing Stir Friction Welding固相连接新技术——搅拌摩擦焊技术
8.Study on Friction Stir Welding of High Strength Aluminium Lithium Alloy高强铝锂合金的搅拌摩擦焊工艺研究
9.Study on Key Question in Friction Stir Welding;搅拌摩擦焊接过程中的若干问题研究
10.Technology and Thermal Finite Element Analysis of Friction Stir Welding;搅拌摩擦焊工艺及温度场有限元分析
11.Study on the Corrosion Behaviors of Friction Stir Welded Joints of Al Alloys;铝合金搅拌摩擦焊接头腐蚀行为研究
12.The Study on Friction Stir Welding Techoloy of LD10CS Alloy;LD10CS铝合金搅拌摩擦焊接技术研究
13.Foundation of Database of Friction Stir Welding of Aluminum Alloy Plate铝合金搅拌摩擦焊工艺参数库的建立
14.Experimental investigation of friction stir welding of 7050 aluminum7050-T7451铝合金的搅拌摩擦焊接试验分析
15.Fricition Stir Welding Process of Forged ZK60 Magnesium Alloy锻造ZK60镁合金的搅拌摩擦焊工艺
16.Process Optimization of Friction Stir Welding of AZ31B Magnesium AlloyAZ31B镁合金搅拌摩擦焊工艺优化
17.Research Progress of Defect on Aluminium Alloys in Friction Stir Welding铝合金搅拌摩擦焊接缺陷的研究进展
18.Microstructure and Mechanical Properties of Friction Stir Welding Joint for Mg Alloy AZ31BAZ31B镁合金搅拌摩擦焊接头组织与性能
相关短句/例句
FSW搅拌摩擦焊
1.Analysis and comparison ofFSW temperature field simulation of plates 3 mm-LY12 and 10 mm-LF2;3mmLY12与10mmLF2搅拌摩擦焊温度场模拟分析比较
2.High-effective,solid-phase new welding technology——FSW;高效、固相焊接新技术——搅拌摩擦焊
3.Influences ofFSW parameters on mechanical properties of LF6/ LD10 aluminum alloy;LF6/LD10铝合金搅拌摩擦焊工艺参数对接头性能的影响
3)friction-stir welding搅拌摩擦焊
1.Investigation of the technology offriction-stir welding for dissimilar materials of T2 copper to H62 brass;T2紫铜与H62黄铜异种材料间的搅拌摩擦焊工艺研究
2.Wearing mechanism of tools infriction-stir welding joint of stainless steel;不锈钢搅拌摩擦焊摩擦头磨损机理研究
3.Microstructures and mechanical properties offriction-stir welding joint of 7A09 aluminium alloy thick-sheet;7A09铝合金厚板搅拌摩擦焊接头显微组织与性能研究
4)friction stir welding(FSW)搅拌摩擦焊
1.This paper introduces the principle and characteristics of friction stir welding(FSW),the materials and design of shoulder and pin of FSW,the fix of welded workpiece,the application of simulation and modeling techniques,as well as the feasibility of its applications to naval weaponry such as advanced amphibious assault vehicle(AAAV) and ships.概述了搅拌摩擦焊的工作原理及其特性,搅拌摩擦头材料与设计,被焊接工件的固定,模拟和模型技术的应用,以及它在船舶和两栖突击车上的应用可行性。
2.The influence of friction stir welding(FSW) process on magnesium alloy"s mechanical properties is analyxed through tensile tests and bend tests.采用不同搅拌摩擦焊工艺焊接镁合金,通过拉伸、三点弯曲试验分析了工艺参数对焊缝机械性能的影响。
3.6M NaCl solution,by static weight loss experiment(gravimetric test) and potentiodynamic polarization curve and electrochemical impedance spectroscopy(EIS),the electrochemical corrosion behaviors of friction stir welding(FSW) dissimilar weld of 5083 and 6082 aluminum alloy and two parent materials were comparatively investigated.首先,对铝合金5083-6082搅拌摩擦焊(FSW)焊缝与5083母材、6082母材的金相组织进行了研究,结果表明,焊缝的组织与两种母材相比,其晶粒明显细化。
5)friction stir weld搅拌摩擦焊
1.Investigation on defect dynamic echo waveform offriction stir welding;搅拌摩擦焊焊缝缺陷的超声波动态波形分析
2.The metal flowing behavior in weld zone has a great influence on the welds mechanical performance infriction stir welding.搅拌摩擦焊中焊缝材料的流动对焊件性能有很大影响。
3.Thefriction stir welding (FSW) of 5 mm thickness plates of 1060 Al/3003 Al was carried out.搅拌摩擦焊中,材料的流动状态对焊件性能有很大影响。
6)friction stir welding摩擦搅拌焊
1.New welding technology of aluminium alloy which is newly researched throughout the world is summarized in the paper,such as laser welding,laser-arc hybrid welding andfriction stir welding.详细介绍了近年来国内外出现的铝合金焊接新技术(激光焊、激光-电弧复合焊以及摩擦搅拌焊)的原理、工艺特点以及在汽车制造中的应用。
2.So it is very important to study thefriction stir welding techno.摩擦搅拌焊是一种用于低熔点铝合金板材的固态焊接方法,用该方法可以焊接通常熔化焊方法难于焊接的铝合金材料。
3.The stress cracking corrosion performance of the specimen prepared byfriction stir welding is better than by metal inert gas welding.结果表明:外加阴极极化使7A52铝合金的应力腐蚀指数增大,应力腐蚀敏感性呈增大趋势;摩擦搅拌焊件应力腐蚀性能优于熔焊件。
延伸阅读
摩擦焊利用工件端面相互摩擦产生的热量使之达到塑性状态,然后顶锻完成焊接的方法。车削工件时切屑往往牢牢地粘在刀头上,轴与轴瓦之间润滑不良时也会产生局部焊合,摩擦焊就是从这些现象出发而发明的。摩擦焊可分为连续驱动摩擦焊和惯性摩擦焊两种。①连续驱动摩擦焊:由电动机带动一个工件旋转,同时把另一工件压向旋转工件,使其接触面相互摩擦产生热量和一定塑性变形,然后停止旋转,同时施加顶锻压力完成焊接(图1)。焊接质量与转速、摩擦时间、摩擦压力、顶锻压力和工件顶锻变形量有关。②惯性摩擦焊:由电动机驱动飞轮达到要求的转速,然后把一个工件压向夹持在飞轮轴上的转动工件,工件间的摩擦阻力使飞轮减速,并将飞轮的动能转换成焊接所需的热能(图2)。焊接质量与飞轮惯性矩、转速和顶锻力有关。摩擦焊所用的摩擦焊机包括驱动系统(惯性摩擦焊机还包括飞轮)和加压装置。全自动焊机还有上、下料装置、去飞边装置和参数自动监控系统。摩擦焊适合于焊接杆件和管件,工艺简单、质量好,劳动条件好,生产率高,耗电量少,易于机械化和自动化。摩擦焊在工厂生产线上广泛用于发动机燃烧室、排气阀、轴、轴套、杆件、管子与法兰、石油钻杆和钻芯的连接和变截面杆件的连接。接头焊后不会产生金属间化合物。摩擦焊也常用于异种金属焊接,如铝与铜、钢、镍、镁合金;铜与钢、银等。摩擦焊在铝-铜导线过渡接头的焊接方面应用尤广。惯性摩擦焊也可焊接直径为 100毫米的棒材或截面积为60厘米2的管件。